Skip to main content

 

Introduction to Perimeter Edge Flashing

In the world of roofing, ensuring the longevity and durability of your roof is paramount. One critical component that plays a significant role in achieving this is the Perimeter Edge (Drip Edge) Flashing. Experts across the board agree that metal drip edge flashing is the ideal solution for keeping water away from roof edges, thereby preventing potential damage and extending the life of your roof.

Why Drip Edge Flashing is Essential

Drip edge flashing is not just a recommendation; it’s a necessity for any roof. It is installed along the roof rakes and eaves to effectively shed water away from the edge, flashing the natural point of separation where the roof deck, fascia, and rafter tail meet. This strategic placement is crucial for the following reasons:

  • Preventing Water Damage: The roof deck is most vulnerable to leaks where it meets a vertical wall, at penetration sites such as soil pipes or chimneys, or at changes in slope like valleys, saddles, mansards, hips, or ridges.
  • Mitigating Differential Movements: These occur when the roof deck moves, but adjacent structures like chimneys do not, creating potential entry points for water.
  • Controlling Water Accumulation: Turbulent water in valleys and on the high side of chimneys, as well as melting snow or ice, can lead to significant water ingress if not properly managed.
  • Sealing Overlapped Shingles: Breaks in overlapped shingles, especially at hips and ridges, can be vulnerable points for water penetration.

Types of Drip Edge Flashing Profiles

Quality Edge Drip Edge comes in various profiles, including T-style, C-style, Siders Edge, Asphalt Drip, Gravel Stop, and Gutter Apron, with many offered in 10′ and 12′ lengths with hem. The choice of profile depends on specific roof requirements and aesthetic preferences.

How to Install Drip Edge Flashing

Proper installation of drip edge flashing is key to its effectiveness. Here’s a brief guide:

  1. Extend the Drip Edge: It should extend back from the roof edges to provide a suitable surface for water runoff.
  2. Nail Strategically: Place one nail in the middle and one on each end of a 10 ft. piece (approximately every 5 ft.) to avoid overnailing, which can cause buckling.
  3. Rakes vs. Eaves: On rakes, install the drip edge on top of the underlayment to stop wind-driven rain from getting underneath. On eaves, install it below the underlayment so water sheds efficiently off the roof.

Special Considerations for Severe Weather Conditions

In areas prone to extreme weather, such as ice dams, installing waterproof underlayments under the drip edge and down the fascia at the eave is advisable. This ensures that the underlayment is not exposed to the sun, providing an extra layer of protection.

Conclusion

Perimeter Edge (Drip Edge) Flashing is a critical component of a well-constructed roof. Its proper installation and maintenance can significantly reduce the risk of water damage, ensuring your roof remains durable and functional for years to come. Remember, a little attention to detail during installation can save you from costly repairs down the line.

FAQs

  • Why is drip edge flashing important? Drip edge flashing is crucial for directing water away from the roof edges, preventing water damage, and protecting the underlying structures.
  • Can I install drip edge flashing myself? Yes, with proper tools and guidance, you can install drip edge flashing. However, for best results, professional installation is recommended.
  • How do I choose the right drip edge profile? The choice depends on your roof’s specific requirements and aesthetic preferences. Consulting with a roofing professional can help you make the right decision.
  • What materials are used for drip edge flashing? Drip edge flashing is typically made from corrosion-resistant metal, such as aluminum or galvanized steel, for long-lasting performance.
  • How often should I inspect my drip edge flashing? Inspect your drip edge flashing at least once a year and after severe weather events to ensure it remains in good condition.
  • Can drip edge flashing be repaired or replaced? Yes, damaged drip edge flashing can be repaired or replaced. If you’re unsure about the extent of the damage, consult a roofing professional.

Leave a Reply